Your shopping cart is currently empty.
Pro-Tect Plastic
Pro-Tect Plastic and Supply works hard to provide quality shrink wrap products. Discover our great plastic film products below.
-
25' Propane Hose with Fittings HEF-25(read more...)Propane tank hose dimensions: 25 ft L x 1/4" ID.
We also offer the propane hose coupler which allows you to connect two hoses together.We advise not connecting more than 2 hoses together when using the Shrinkfast heat guns as you lose too much pressure for the propane heat gun to run properly.
Price: $119.00In stock -
36" x 84" Construction Zipper Door, ClearMaterial Dimensions: 36" W x 84" H Opening Dimensions: 28" W x 76" H(read more...)
This Construction for shrink wrap plastic has 2 straight zippers, that when unzipped (upwards), allows you to roll the middle material up (using tape to hold it up) to open up the doorway. You can also leave the door flap down and push it as you walk in and out.
Installation: Tape both sides and the top, leaving the bottom free, unzip both zippers and cut out shrink film underneath and zip the zippers back up.
Note: As with the zipper hatches, you do NOT shrink the construction doors. They are installed AFTER you have shrunk your project.Price: $40.00In stock -
5 gal 20 lb Propane CylinderPart #PA-00-LP5(read more...)
Size: 5 gallon (20 lb propane tank)
Standard Bar-B-Que style 5 gallon propane tank used with the Shrinkfast 998 or PG-118M heat guns for heat shrinking shrink film plasticPrice: $50.00In stock -
6 mil Clear Shrink Film General Purpose 20' x 100'(read more...)This clear shrink wrap film is used for packaging of products, commodities, and green house covers. This shrink packaging film is 6 mil and is excellent for general shrink wrap applications.
MIL: 6 Color: Clear, with 3 mo UVI
Roll Size: 20' x 100'
Roll Weight: 75 lbsPrice: $140.00In stock -
Blades, Replacements for Safety Hook KnifePackage of 10 shrink wrap knife Refill Blades for the Safety Hook Knife(read more...)Price: $2.00In stock -
Desiccant Bags300 gram Desiccant Bags for Moisture/Mildew Control inside boats, equipment or anything that is fully encapsulated with shrink wrap.(read more...)
Bag Dimensions: 10" L x 4" W
We recommend:
1 Bag - Small boats/equipment, up to 12' L
2 Bags - Medium/Large boats/equipment, up to 22' L
3 Bags - Large/X-Large boats/equipment, up to 33' L
** Note: If using desiccant moisture control bags, do NOT use vents, as this will defeat the purpose of the desiccant bag.Price: $4.00In stock -
DIY 25' Propane Hose with Fittings HEF-25(read more...)Length: 25' ID: 1/4" OD: 9/16"
DIY 25' propane hose comes complete with fittings to connect to your propane tank and
heat gun.You can connect 2 hoses together using a Propane Hose Coupler.
***We advise not connecting more than 2 hoses together when using Shrinkfast Heat Guns as you lose too much pressure to properly run the heat gun.
Price: $119.00In stock -
DIY 4" White Preservation TapeRoll Size: 4" W x 36 yds (108') L(read more...)
The adhesive on this white tape has an additional additive for paint sensitive surfaces. This white preservation tape will not remove stickers or labeling and won't leave a residue.
*It is highly recommended to test the preservation tape in an inconspicuous area before fully using.Price: $18.50In stock -
DIY 7 mil Boat Shrink WrapPro-Tect's 7(read more...)mil is widely used for package, storageand transport of boats and smaller equipment. White plastic roll with UVI for Ultra-Violet Resistance.
To choose the correct width size roll of material, you will need to measure down about 8" or more from the top of one side to get your starting point, then measure up and over the width of the boat including everything that will beshrink wrapped and down the other side about 8" or more. You can also shrink wrap your boat all the way down to the hull. After figuring out your measurement, you can match it to the closest width size roll of shrink wrap material.
*Note: our shrink wrap materials are also able to be welded (heat seamed) to itself to make larger widths if needed.
Read about other boat wrapping products.
Price: $203.00In stock -
DIY Desiccants, 300 gram bag(read more...)300 gram desiccant packs for moisture/mildew control inside boats, equipment or anything that is fully encapsulated with industrial shrink wrap. Buy desiccant bags for your boat.
Desiccant Bag Dimensions: 10" L x 4" W
We recommend:
1 Bag - Small boats/equipment, up to 12' L
2 Bags - Medium/Large boats/equipment, up to 22' L
3 Bags - Large/X-Large boats/equipment, up to 33' L
** Note: Ifusing desiccant bags, do NOT use shrink wrap vents, as this will defeat the purpose of the desiccant bag.Price: $4.00In stock -
DIY Economy 4" Shrink Wrap Tape, 7 milRoll Size: 4" x 60 Yd (180')(read more...)
Mil Thickness: 7 mil EconomyThinner than our standard 9.5 mil Heat Shrink Wrap TapeThis white adhesive tape is for when you don't need the heavier duty tape for attachment. Great to use for repairs and patching.Price: $13.50In stock -
DIY Heat Gun RentalShrinkfast 998 or 975 Heat Gun Rental(read more...)
1-week Rental, starting from the day you receive the shrink wrap heat gun. (We don't count transit time)
By ordering the shrink wrap heat gun rental, you are accepting the lease agreement located under the customer service tab.Price: $75.00In stock -
DIY How To BoatStep by Step Heat Shrink Wrap Boat Video with printable training manual.(read more...)
Shows step by step from setting up your heat gun to measuring and rolling out your material and then showing the entire installation/shrinking process.
Available as a download or on a flash drive.Price: $15.00In stock -
DIY Leather Safety Gloves - PairLeather Safety Gloves, 1 pair.(read more...)
Size Large
These leather protective gloves can be used with the heat gun when heat seaming material together. Use your gloved hand to "pat" the shrink film after heating it, to help weld it together.Price: $14.00In stock -
DIY Premium 9.5 Mil 4" White Shrink Wrap TapeRoll Size: 4" W x 55 yds (165') L Color: White(read more...)
We recommend 2-3 rolls of heatshrink tape, depending on the size of your boat or equipment and method of attachment.Price: $17.00In stock -
DIY Pro-Tect Environmental Spray AdhesiveWe recommend 1 can of spray glue for plastic. This will allow you to do multiple boats/equipment.(read more...)
Heavy duty spray glue is used for heat seaming over laps of material or to seam 2 pieces together.
It's a wide web spray with no chlorinated solvents and a fast tack time.Price: $7.00In stock -
DIY Pro-Tect's 3/4" x 750' Poly Woven Strapping(read more...)Sturdy, High Tensile Strength, Poly Woven Strapping
3/4" x 750' roll
950 lb TensileUsed as a method of attachment of the shrink wrap plastic or as a cross brace for added support.
Price: $38.00In stock -
DIY Shrink Film KnifeShrink Film Safety "Hook" Knife(read more...)
Model #100
This safety cutting knife can be used to safely cut shrink film with ease.Price: $10.00In stock -
Regular Price: $685.00On Sale For: $645.00In stock -
DIY Shrinkfast MZ UL Heat Gun Kit(read more...)The NEW Shrinkfast MZ UL heat gun kit with
carry case, auto igniter, regulator, 25' hose and UL guard. This newly released Shrinkfast shrink wrap heat gun kit is a smaller version of the Shrinkfast 998 Heat Gun. The MZ is geared towards the DIY Market forsmaller project, such as shrink wrapping your boats, RV's, Outdoor Equipment/Furniture for outdoor storage or for those businesses that want protection while they transport/store their products. The less intimidating, smaller flame spread provides an even heat that will enable the user to easily get into all the nooks and crannies of mostall small projects. The Shrinkfast MZ also offers an innovative ignition system that does NOT require a spark plug!- Complete Kit weight: 17 lbs.
- Heat gun itself is lightweight - 1.75 lbs
- Ergonomic design for extended use
- Perfectly balanced for operator comfort
Cool combustor for operator safety- Extremely durable
- 50,000 BTU/HR @ 22 PSI
- Full
one year factory warranty - Made in the USA
Portability: The Shrinkfast MZ heat gun is completely portable andhand heldVersatility: This adjustable heat gun provides five-sided protection for any size or shape load from small uneven pallets to large pieces of machinery.
Economy: Uses less than three cents of fuel per pallet, making it the least expensive way to shrink wrap and competitive with low energy stretch systems.
Speed: The Shrinkfast heat gun can shrink a 40" x 48" x 60" pallet in less than four minutes, and is easy to operate requiring no training or set-up time.
Click here for additional information on Heat Gun use and LP Gas safetyRegular Price: $555.00On Sale For: $518.00In stock